While there are several DIY projects you can complete on your own as a homeowner, a water softener installation in West Bend, WI isn’t one of them. For this project, you’ll need a professional installer to complete the work. They will ensure the system is functioning properly. Before the installer arrives, you can save time by preparing for the project.
Choose a Location
Your options for the location of the water softener equipment will be limited. You’ll need a flat, dry surface that’s close to an electrical outlet. Additionally, the location must be within 30 feet of a drain. Finally, the water softener must be installed between the main water line and the water heater.
Shut Off the Main Water Supply
You can help the installer by shutting off your home’s water supply in advance. Turn the gauge to the off position at the main valve. It’s also helpful to clear away any debris or storage boxes from the areas around the main water valve and the location you have chosen for the water softener installation. You’ll want to give the installer sufficient space for the work.
Drain Your Faucets
Finally, you’ll want to make sure all of the water has been purged from your faucets before your water softener installation in West Bend, WI. Run every faucet in your sinks, showers, and bathtubs. Don’t forget to flush the toilets in your home. Don’t close the faucets until they have all completely drained.
Learn more about treating your home’s hard water problem when you visit Schaefer’s Soft Water online at schaeferssoftwater.com.
Connect with Schaefer’s Soft Water on Facebook for more information.
